大家好,今天小编关注到一个比较有意思的话题,就是关于can bus编程序的软件的问题,于是小编就整理了4个相关介绍can bus编程序的软件的解答,让我们一起看看吧。
canbus box协议盒干什么用的?
所谓CANBUS协议盒,一般指的是应用在CAN总线上的分析工具,我们也可以把它称作CAN总线分析仪。在大多数的时候,这种CANBUS协议盒工具都是体积小巧,便于携带的。
一般来说,它的各个侧面分别分布着USB接口,端子接口,电阻拨码开关,各类系统指示灯等等,如果相关的工作人员想要用它测试分析CAN总线上的具体情况,首先要把它通过数据连接线分别连向设备端和电脑端,典型例子是分析汽车里面的CAN总线数据。
canbusdecoder是什么协议盒?
canbusdecoder是睿志诚Can-Bus汽车总线协议盒,这些功能就能“信手拈来”,让车机与汽车之间的通讯变得轻松便捷。
睿志诚作为专业从事Can-Bus汽车总线协议解决方案的系统开发及生产服务型企业,自08年便开始对Can-Bus技术进行研发、销售,深耕行业已有10年,为汽车电子行业提供完善的汽车总线总体解决方案。
通过10年的沉淀,睿志诚已经拥有200多款主流车型的Can-Bus总线协议,几乎覆盖目前市面上所有车型(除少量高端车型),在车载后装市场影响极大。
CAN-BUS数据总线由哪些部分构成?各组成部件的功能是什么?
CAN-BUS上的每个控制单元中均设有一个CAN控制器和一个CAN收发器。CAN控制器主要用来接收微处理器传来的信息,对这些信息进行处理并传给CAN收发器,同时CAN控制器也接收来自CAN收发器传来的数据,对这些数据进行处理,并传给控制单元的微处理器。
CAN收发器用来接收CAN控制器送来的数据,并将其发送到CAN数据传输总线上,同时CAN收发器也接收CAN数据总线上的数据,并将其传给CAN控制器。
2.数据总线终端电阻
CAN-BUS数据总线两端通过终端电阻连接,终端电阻可以防止数据在到达线路终端后象回声一样返回,并因此而干扰原始数据,从而保证了数据的正确传送,终端电阻装在控制单元内。
3.数据传输总线
数据传输总线大部分车型用的是两条双向数据线,分为高位﹝CAN-H﹞和低位﹝CAN-L﹞数据线。为了防止外界电磁波干扰和向外辐射,两条数据线缠绕在一起,要求至少每2.5cm就要扭绞一次,两条线上的电位是相反的,电压的和总等于常值。
mbus与can-bus的区别?
mbus释义:
生产部
例句:
This paper introduces Mbus, including command format, addressing, message constitution, transport, awareness of entities and security, and then brings forward the three-tier architecture.
该文就它的命令格式、寻址策略、报文格式、传输策略、状态感知机制和安全机制等方面进行了介绍,提出了三层的体系结构。
can-bus释义:
控制器局域网总线技术(controller area network-bus)
例句:
By repeating experiment, a lot of network delays induced by CAN-bus are taken.
通过反复实验,捕获了大量由于CAN网络而引起的网络时延。
到此,以上就是小编对于can bus编程序的软件的问题就介绍到这了,希望介绍关于can bus编程序的软件的4点解答对大家有用。